| About |
|---|
| Dryflex PCW 90A331B: Thermoplastic Elastomer Base Material: TPO Hardness: 90 Shore A Service Temperature Range: -50 to +75°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone / UV Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Approx. 0.75 – 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE&& |
| Product Description | |
|---|---|
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Renewable resources,Ozone resistance,Solvent resistance |
| Availabilitys | Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 | g/cm³ | ISO 2781 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 9.50 | MPa | ISO 37 |
| 100% strain | 9.30 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 290 | % | ISO 37 |
| tear strength | 74 | kN/m | ISO 34-1 |
| Compression deformation | |||
| 23℃，24 hr | 63 | % | ISO 815 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 90 | ISO 868 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 170 to 200 | °C | |
| Barrel middle temperature | 170 to 200 | °C | |
| Barrel front temperature | 170 to 200 | °C | |
| Mold temperature | 15 to 40 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method C, Crescent |
| 3. Type B |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |