Osterlene® LLB2000

About
LLB2000 is intended for use in general purpose injection molding applicatons such as housewares and industrial containers. LLB2000 may also be used for blending in masterbatch applications. LLB2000 meets the requirements of the Food and Drug Administration regulation, 21 CFR 177.1520. This regulation allows the use of this olefin polymer in “…articles or components of articles intended for use in contact with food…” Specific limitations or conditions of use may apply. Contact your Osterman sales representative for more information.&&

About

LLB2000 is intended for use in general purpose injection molding applicatons such as housewares and industrial containers. LLB2000 may also be used for blending in masterbatch applications. LLB2000 meets the requirements of the Food and Drug Administration regulation, 21 CFR 177.1520. This regulation allows the use of this olefin polymer in “…articles or components of articles intended for use in contact with food…” Specific limitations or conditions of use may apply. Contact your Osterman sales representative for more information.&&

Product Description
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Food contact compliance,Low density,Butylene copolymer
Availabilitys	Africa & Middle East ,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.925	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	20	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
10% non-ionic detergent, F50	20.0	hr	ASTM D1693B

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -76.1	℃	ASTM D746
Vicat Softening Temp	92.2	℃

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	50		ASTM D2240
tensile strength
yield	13.8	MPa
fracture	8.27	MPa
Tensile strain
yield	8.0	%
fracture	60	%
Bending modulus
2% secant	379	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.