4TECH® 9CP21116 HUV

About
4TECH 9CP21116 HUV is a MFI 15 16% Talc Filled Heat & UV Stabilised Copolymer Polypropylene / Polyethylene Blend&&

Product Description
Generic	PP+PE
Material Status	Commercial: Active
Features	Weather resistance is good,Copolymer,Heat Stabilized
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.01	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	15	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	1750	MPa	ISO 527-2/5
tensile strength
Fracture, 23 ℃	20.0	MPa	ISO 527-2/5

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	25	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	95.0	℃	ISO 75-2/B
1.8 MPa, unannealed	55.0	℃	ISO 75-2/A

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.