MAJORIS CFR265

About
MAJORIS CFR265 is a Polypropylene product. It can be processed by injection molding and is available in Europe. Characteristics include: Flame Rated Eco-Friendly/Green&&

Product Description
Generic	PP not specified
Material Status	Commercial: Active
Features	Renewable resources,V-0
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.36	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	5.0	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Bending modulus	2300	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	25	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength
23℃	72	kJ/m²	ISO 179/1eU

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	V-0		UL 94
Glowing wire flammability index
1.0 mm	960	℃	IEC 60695-2-12
Extreme oxygen index	26	%	ISO 4589-2

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80	°C
Drying time	3.0	hr
Processing (melt) temperature	210 to 240	°C
Mold temperature	30 to 50	°C
Injection speed	Moderate

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.