| About |
|---|
| Product Description | |
|---|---|
| Supplier | TOTAL |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.954 | g/cm³ | ASTM 1505 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 3.9 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 34 | R | ASTM D-785 |
| Bending modulus | |||
| 23℃ | 9000 | kg/cm² | ASTM D790 |
| Tensile strain | |||
| Fracture, 50mm/min | 500 | % | ASTM D638 |
| tensile strength | |||
| yield | 250 | kg/cm² | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 130 | ℃ | |
| Vicat Softening Temp | |||
| 1kg | 126 | ℃ | ASTM D1525 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |