Clariant Nylon 6/12 612G43-L

About
Clariant Nylon 6/12 612G43-L is a Polyamide 612 (Nylon 612) material filled with 43% glass fiber. It is available in North America for injection molding. Primary attribute of Clariant Nylon 6/12 612G43-L: Lubricated.&&

Product Description
SupplierClariant
GenericPA612
Material StatusCommercial: Active
FeaturesLubricating
AvailabilitysNorth America
Process MethodsInjection Molding

Technical Data
PHYSICALNominal valueUnitTest method
Density1.41g/cm³ASTM D792
Shrinkage rate
MD0.30%ASTM D955
Water absorption rate
24hr0.17%ASTM D570

MECHANICALNominal valueUnitTest method
tensile strength159MPaASTM D638
Tensile strain
fracture4.0%ASTM D638
Bending modulus8270MPaASTM D790
bending strength241MPaASTM D790

IMPACTNominal valueUnitTest method
Impact strength of cantilever beam notch120J/mASTM D256

THERMALNominal valueUnitTest method
Hot deformation temperature
1.8 MPa, unannealed210ASTM D648
0.45 MPa, unannealed210ASTM D648
Melting temperature212

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.