EVICOM™ RI5/011

About
The values listed for Tensile Modulus were tested at an unspecified rating. The values listed for Coefficient of Thermal Expansion were tested at an unspecified rating. The values listed for Thermal Conductivity were tested at an unspecified rating.&&

Product Description
Supplier	INEOS
Generic	PVC，刚硬
Material Status	Commercial: Active
Features	High impact resistance,Good liquidity
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
THERMAL	Nominal value	Unit	Test method
Linear coefficient of thermal expansion
MD	6.0E-5	1/℃	ASTM D696
Thermal conductivity coefficient	0.16	W/m/K	ASTM C177

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
23℃	2.80	MPa	ASTM D638
Rockwell hardness
R-level	115		ASTM D785

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.