| About |
|---|
| SABIC® Vestolen A 6060 is a natural bimodal high density polyethylene ( HDPE) resin. Typical applications include semi-finished goods like sheets as well as non-pressure pipe applications such as cable conduits. This product is not intended for and must not be used in any pharmaceutical/medical applications.&& |
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | High density,Bimodal molecular weight distribution |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.950 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，5.0kg | 0.30 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23 ℃, 2 mm, molded | 1000 | MPa | ISO 527-2/1BA/50 |
| tensile strength | |||
| Yield, 23 ℃, 2 mm, molded | 25.0 | MPa | ISO 527-2/1BA/50 |
| Tensile strain | |||
| Yield, 23 ℃, 2 mm, molded | 9.0 | % | ISO 527-2/1BA/50 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | |||
| DSC | 124 to 128 | ℃ | DIN 53765 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |