| About |
|---|
| Kumho SBR 1753 is an Emulsion Styrene Butadiene Rubber material. It is available in Asia Pacific, Europe, or North America.&& |
| Product Description | |
|---|---|
| Supplier | Kumho Petrochemical |
| Generic | SBR-乳液聚合 |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Mooney viscosity | ASTM D1646 | ||
| — | 44 to 54 | MU | ASTM D1646 |
| — | 68 | MU | ASTM D1646 |
| oil content | 26 to 29 | % | ASTM D5774 |
| Organic Acid | 3.9 to 5.7 | % | ASTM D5774 |
| Soap | 0.50 | % | ASTM D5774 |
| Ash Content | 0.80 | % | ASTM D5667 |
| Volatiles | 0.50 | % | ASTM D5668 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 19.6 | MPa | ASTM D412 |
| 200% strain | 8.83 to 11.8 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 450 | % | ASTM D412 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Bound AN | 23 to 25 | % | ASTM D5775 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Compound, ML1+4 at 100°C |
| 3. Raw, ML1+4 at 100°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |