| About |
|---|
| AOC’s Vipel F764 Series is a high cross-linked isophthalic polyester resin. AOC’s Vipel F764 Series resins were developed to meet the demanding requirements of underground petroleum storage tanks that contain oxygenated fuels. BENEFITS UL Recognition AOC’s Vipel F764 Series resins are recognized by UL for meeting the requirements of UL 1316 and UL 1746 Part II and Part III. Corrosion Resistance Vipel F764 Series resins provide excellent corrosion resistance when used in contact with inorganic and organic acids. Solvent resistance is field-proven for many fuels including gasoline, kerosene, heating oil and crude oils. Refer to AOC’s “Corrosion Resistant Resin Guide” for corrosion reistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC. Versatile Suitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.&& |
| Product Description | |
|---|---|
| Generic | 间苯二甲酸聚酯 |
| Material Status | Commercial: Active |
| Features | Crosslinked,Corrosion Resistant,Acidproof,Grease resistance,Solvent resistance,Gasoline resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| styrene content | 45 | % | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 139 | ℃ | ASTM D648 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Gel to Peak | 16.0 | min | |
| exothermic peak | 218 | ℃ | |
| Thixotropic index | |||
| 25℃ | 2.00 |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.07 | g/cm³ | |
| viscosity | |||
| 25℃，Brookfield RVT | 0.60 | Pa·s | |
| Gelation time | |||
| 25℃ | 27 | min |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Babbitt hardness | 51 | ASTM D2583 | |
| Tensile modulus | 3520 | MPa | ASTM D638 |
| tensile strength | 69.6 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 2.3 | % | ASTM D638 |
| Bending modulus | 3860 | MPa | ASTM D790 |
| bending strength | 123 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2/20 rpm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |