| About |
|---|
| LL 0209 AA is a LLDPE copolymer with butane as comonomer which contains antioxidant. It is recommended for general purpose application. It is suitable for blending with conventional LDPE.&& |
| Product Description | |
|---|---|
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Negative |
| Features | Good Rigidity,Good dissection,Inoxidizability,Low density,Copolymer,Butylene copolymer,Puncture Resistant |
| Availabilitys | Africa & Middle East ,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.920 | g/cm³ | ISO 1872-1 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.90 | g/10min | ISO 1133 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ISO 1184 | ||
| MD, yield | 10.0 | MPa | ISO 1184 |
| TD, yield | 11.0 | MPa | ISO 1184 |
| MD, fracture | 41.0 | MPa | ISO 1184 |
| TD, fracture | 32.0 | MPa | ISO 1184 |
| Tensile strain | ISO 1184 | ||
| MD, fracture | 620 | % | ISO 1184 |
| TD, fracture | 840 | % | ISO 1184 |
| Drop hammer impact | 150 | g | ASTM D1709 |
| Elmandorf tear strength | ASTM D1922 | ||
| MD：25 µm | 150 | g | ASTM D1922 |
| TD：25 µm | 370 | g | ASTM D1922 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |