Sylvin 9972-80 Grey 9466

About
Sylvin 9972-80 Grey 9466 Is A Vinyl Compound Formulated For Injection Molding Applications.&&

Product Description
Supplier	Sylvin
Generic	PVC, not specified
Material Status	Commercial: Active
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.32	g/cm³	ASTM D792

elastic body	Nominal value	Unit	Test method
tear strength	70.1	kN/m	ASTM D624

THERMAL	Nominal value	Unit	Test method
Melting temperature	166 to 177	℃

MECHANICAL	Nominal value	Unit	Test method
Shore hardness			ASTM D2240
Shaw’s A	80		ASTM D2240
Shore A, 10 seconds	80		ASTM D2240
tensile strength
fracture	16.5	MPa	ASTM D638
Tensile strain
fracture	350	%	ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.