Epoxies, Ect. 60-7170

About
UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. UV 60-7170 is water clear and is designed to be used as an adhesive, coating, or encapsulant. This system is moisture and chemical resistant. UV Cure 60-7170 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to “dark cure.” Once exposed to UV light the UV Cure 60-7170 will continue to cure in the absence of light. This is advantageous when potting or joining substrates with shadow areas. UV Cure 60-7170 may also be heat cured as a secondary cure operation. UV Cure 60-7170 is not affected by oxygen and will not have a sticky or greasy surface. The surface is rigid, smooth, and glossy when properly cured. UV Cure 7170 bonds to metal, plastic, paper and ceramic. UV Cure 60-7155 is a lower viscosity version of UV Cure 60-7170. Features: One component Excellent adhesion Contains no solvents Good electrical insulation Low shrinkage No out gassing Will shadow cure Good weathering resistance Cure is not inhibited by oxygen Low odor&&

About

UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. UV 60-7170 is water clear and is designed to be used as an adhesive, coating, or encapsulant. This system is moisture and chemical resistant. UV Cure 60-7170 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to “dark cure.” Once exposed to UV light the UV Cure 60-7170 will continue to cure in the absence of light. This is advantageous when potting or joining substrates with shadow areas. UV Cure 60-7170 may also be heat cured as a secondary cure operation. UV Cure 60-7170 is not affected by oxygen and will not have a sticky or greasy surface. The surface is rigid, smooth, and glossy when properly cured. UV Cure 7170 bonds to metal, plastic, paper and ceramic. UV Cure 60-7155 is a lower viscosity version of UV Cure 60-7170. Features: One component Excellent adhesion Contains no solvents Good electrical insulation Low shrinkage No out gassing Will shadow cure Good weathering resistance Cure is not inhibited by oxygen Low odor&&

Product Description
Generic	环氧树脂
Material Status	Commercial: Active
Features	Weather resistance is good,Good Clarity,Low or no water absorption,Low contractility,Low odor,Good bond,Solvent resistance,Insulation,Agglomerability
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
Supplementary information	Nominal value	Unit	Test method
working temperature	-50.0 to 200	℃

Uncured Properties	Nominal value	Unit
colour	Clear/Transparent
Solid content	100	%
Density
25℃	1.09	g/cm³
viscosity
25℃	4.5	Pa·s
Storage period
40℃	> 1	month

Cured Properties	Nominal value	Unit	Test method
tensile strength	42.7	MPa
Electrical strength	17	kV/mm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.