| About |
|---|
| PLUSTEK PB829G50BK11 is Black, 50% Glass Fiber , Impact Modified,UV Stabilized POLYAMIDE 6, Injection Molding Applications This product is food contact standards compliant. |
| Product Description | |
|---|---|
| Supplier | Ram-On |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,High impact resistance,Food contact compliance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.54 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 14400 | MPa | ISO 527-2/1A |
| Tensile stress | 175 | MPa | ISO 527-2/1A |
| Tensile strain | |||
| fracture | 3.9 | % | ISO 527-2/1A |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 25 | kJ/m² | ISO 179-1eA |
| Charpy Unnotch Impact strength | 90 | kJ/m² | ISO 179/1eU |
| Impact strength of cantilever beam notch | 27 | kJ/m² | ISO 180 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| Temperature at the rear of the barrel | 290 to 300 | °C | |
| Temperature in the middle of the barrel | 290 to 300 | °C | |
| Front temperature of material barrel | 290 to 300 | °C | |
| Mold temperature | 90 to 95 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |