Jampilen HP562S

About
Jampilen HP562S is a very high fluidity homopolymer for the high speed production of very low denier BCF and CF. Jampilen HP562S exhibits excellent antigasfading properties and due to its high homogeneity and very high MFR, Jampilen H39S offers stable extrusion and excellent processability on both short and long spinning lines. This grade allows a high stretch ratio and gives tough, resilient and colourfast fibres. Jampilen HP562S is eminently used for the high speed production of bulked continuous filament for carpet face yarns. Another major application is the production of high tenacity continuous filament for straps for backpacks, handles for big bags and safety belts. Continuous filament with medium tenacity is used for upholstery and heavy duty clothing. Jampilen HP562S is suitable for food contact.&&

About

Jampilen HP562S is a very high fluidity homopolymer for the high speed production of very low denier BCF and CF. Jampilen HP562S exhibits excellent antigasfading properties and due to its high homogeneity and very high MFR, Jampilen H39S offers stable extrusion and excellent processability on both short and long spinning lines. This grade allows a high stretch ratio and gives tough, resilient and colourfast fibres. Jampilen HP562S is eminently used for the high speed production of bulked continuous filament for carpet face yarns. Another major application is the production of high tenacity continuous filament for straps for backpacks, handles for big bags and safety belts. Continuous filament with medium tenacity is used for upholstery and heavy duty clothing. Jampilen HP562S is suitable for food contact.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Excellent Processability,Good flexibility,High liquidity,Food contact compliance,Good color stability,Elastic,Good Tensile Strength,Solvent resistance,Homopolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	35	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	30	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	94.0	℃	ASTM D648
Vicat Softening Temp	152	℃	ASTM D1525 2
Accelerate oven aging
150℃	150	hr	ASTM D3012

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	100		ASTM D785
tensile strength
yield	32.0	MPa	ASTM D638
Tensile strain
yield	10	%	ASTM D638
Bending modulus	1450	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.