Europrene® SOL T 6320

About
Europrene® SOL T 6320 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 31 % wt and diblock content is 75 %. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 6320 is a linear block copolymer, characterised by excellent dispersability and extremely easy processability. Main Applications Designed for bitumen modification, where high compatibility and easy dispersability are requested, Europrene® SOL T 6320 provides very low viscosity to bituminous binders. The high diblock content also assures excellent performance in adhesive applications, including bituminous self adhesive membranes. Characterized by the excellent processability, SOL T 6320 can be used in polymer modification and plastic recycling.&&

About

Europrene® SOL T 6320 is a linear block copolymer obtained by anionic polymerisation. The polymer is based on styrene and butadiene, where bound styrene is 31 % wt and diblock content is 75 %. A non-staining antioxidant system is added during the production process. Key Features Europrene® SOL T 6320 is a linear block copolymer, characterised by excellent dispersability and extremely easy processability. Main Applications Designed for bitumen modification, where high compatibility and easy dispersability are requested, Europrene® SOL T 6320 provides very low viscosity to bituminous binders. The high diblock content also assures excellent performance in adhesive applications, including bituminous self adhesive membranes. Characterized by the excellent processability, SOL T 6320 can be used in polymer modification and plastic recycling.&&

Product Description
Generic	SBS
Material Status	Commercial: Active
Features	Excellent Processability,Low Viscosity,Machinable,Block Copolymer,Good bond,Inoxidizability
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
elastic body	Nominal value	Unit	Test method
tensile strength	6.00	MPa	ASTM D412
300% strain	3.00	MPa	ASTM D412
Tensile strain
fracture	1200	%	ASTM D412

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	64		ASTM D2240

Supplementary information	Nominal value	Unit	Test method
Diblock Content	75.0	wt%
Storage period	18	month

PHYSICAL	Nominal value	Unit	Test method
Density	0.940	g/cm³	ASTM D792
Melt Flow Rate
190℃，5.0kg	11	g/10min	ASTM D1238
Combined with styrene	31.0	%	Internal Method
Brookfield viscosity
25wt% toluene sol	600	mPa·s	ASTM D1084

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.