Shanghai Ofluorine PVDF T-1

About
T-1 PVDF for liquid coating is solid powder, it can mixed with acrylic resin, additive,and become superior performance baking PVDF fluorocarbon coatings. Compare with other grade of PVDF, T-1 is more suitable for stoving finish, baking light color coatings. T-1 PVDF powder as raw materials, through mixtures, spray process, the fluorocarbon coatings have good mechanical strength, flexibility, good irradiation resistant, excellent adverse weather conditions resistant, and stability in wide temperature range. Application and use method T-1 PVDF be widely used in coil coatings, curtain wall, skylight, roof, aluminium extrusion profiles, aluminium composite panel, composite board etc. Use method: Roller coatings, Bruching, dipping, spraying , powder electrostatic spraying, it become coating film after baking. PVDF coatings performance Super weatherability, it can beused more than 20 years on outdoor weather. Excellent temperature resistance, PVDF coatings can be long-time used in -60°C to 150°C PVDF coating standard America AAMA 2605-98 P.R. China chemical industry standard HGT3793-2005&&

About

T-1 PVDF for liquid coating is solid powder, it can mixed with acrylic resin, additive,and become superior performance baking PVDF fluorocarbon coatings. Compare with other grade of PVDF, T-1 is more suitable for stoving finish, baking light color coatings. T-1 PVDF powder as raw materials, through mixtures, spray process, the fluorocarbon coatings have good mechanical strength, flexibility, good irradiation resistant, excellent adverse weather conditions resistant, and stability in wide temperature range. Application and use method T-1 PVDF be widely used in coil coatings, curtain wall, skylight, roof, aluminium extrusion profiles, aluminium composite panel, composite board etc. Use method: Roller coatings, Bruching, dipping, spraying , powder electrostatic spraying, it become coating film after baking. PVDF coatings performance Super weatherability, it can beused more than 20 years on outdoor weather. Excellent temperature resistance, PVDF coatings can be long-time used in -60°C to 150°C PVDF coating standard America AAMA 2605-98 P.R. China chemical industry standard HGT3793-2005&&

Product Description
Supplier	Ofluorine
Generic	PVDF
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,Good flexibility,High purity,Gamma radiation,Low odor
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.74 to 1.77	g/cm³	ASTM D792
Melt Flow Rate
230℃，10.0kg	0.0 to 2.0	g/10min	ASTM D1238
Water absorption rate
balance	0.10	%	Karl Fisher
purity	99.5	%

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	156 to 165	℃	ASTM D3418

Supplementary information	Nominal value	Unit	Test method
decomposition temperature	382 to 393	℃	TGA
fineness	5.50	B	ASTM D1210

Notes
1. Typical properties: these are not to be construed as specifications.
2. 10°C/min
3. % Wt. loss Air
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.