| About |
|---|
| YUZEX 7210 is a high density polyethylene resin with good processibility. It offers a high impact resistance combined with good stiffness, high ESCR and low warpage. This resin is particularly suitable for the production of pails and crates. YUZEX 7210 complies with FDA regulation 21 CFR177.1520.&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Low warping,Excellent Processability,High impact resistance,High ESCR |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 5.5 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | 40.0 | hr | ASTM D1693 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 69 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -80.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 125 | ℃ | ASTM D1525 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| DuPont Impact Strength | 9.81 | J | JIS K6718 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 41 | ASTM D2240 | |
| Rockwell hardness | |||
| R-level | 41 | ASTM D785 | |
| tensile strength | |||
| yield | 23.5 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 500 | % | ASTM D638 |
| Bending modulus | 834 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |