Ekatal® C 9 X

About
Ekatal® C 9 X is an Acetal (POM) Copolymer product. It is available in Europe.&&

Product Description
Generic	Copolymer Polyformaldehyde
Material Status	Commercial: Active
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.40	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	10	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1800	MPa	ISO 527-2
tensile strength
yield	41.0	MPa	ISO 527-2
Tensile strain
fracture	39	%	ISO 527-2
bending strength	39.0	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-30℃	3.4	kJ/m²	ISO 179/1eA
23℃	5.3	kJ/m²	ISO 179/1eA

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	80.0	℃	ISO 75-2/Af

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.