| About |
|---|
| VESTOLIT G 170-L100UF is a medium molecular weight, ultrafine particle size homopolymer dispersion resin. With the very fine particle size, it provides excellent casting characteristics for thin film applications, and ability to produce even thinner gauge coatings. The excellent dispersibility provides good product throughput during the organosol manufacturing process with the sand milling process reduction or elimination. A medium molecular weight resin provides a good balance of fused film properties and processing temperatures. The low residual emulsifier level provides good end product performance in the areas of clarity, moisture blush resistance, low taste and odor. This resin is accepted by FDA for use under 21CFR175.300 (food contact application).&& |
| Product Description | |
|---|---|
| Generic | PVC homopolymer |
| Material Status | Commercial: Active |
| Features | Good Clarity,Low odor |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | casting |
| Technical Data | |||
|---|---|---|---|
| Supplementary information | Nominal value | Unit | Test method |
| Clean Point（Grind） | 5.50 | Hegman | Internal Method |
| North fineness (Grind) | 6.00 | Hegman | Internal Method |
| Residual Vinyl Chloride Monomer | < 1 | ppm | Internal Method |
| Methanol extractable | 1.3 | % | Internal Method |
| polymerization process | 离散度 | ||
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.40 | g/cm³ | ASTM D792 |
| K-Value | 70.0 | Internal Method | |
| Intrinsic viscosity | 1.0 | ASTM D1243-60-A | |
| humidity | |||
| Karl Fisher | 0.070 | % | Internal Method |
| bulk density | 272 | g/l | |
| Relative viscosity | 2.37 | Internal Method | |
| Brookfield viscosity | Internal Method | ||
| One day viscosity @ 30 rpm | 300 | mPa·s | Internal Method |
| 1-hour viscosity @ 30 rpm | 525 | mPa·s | Internal Method |
| 1-hour viscosity @ 30 rpm | 200 | mPa·s | Internal Method |
| 1-hour viscosity @ 6 rpm | 300 | mPa·s | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Correlation, 0.5g/100ml |
| 3. VESTOLIT STP 683 |
| 4. Correlation, Cyclohexanone 1% |
| 5. VESTOLIT STP 1434 (with provided formulation) |
| 6. VESTOLIT STP 894 |
| 7. VESTOLIT STP 1005 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |