ALCUDIA® EVA PA-540

About
EVA copolymer ALCUDIA® PA-540 is suitable for injection moulding and recommended for those applications where flexibility and toughness are required. It contains antioxidant additives. TYPICAL APPLICATIONS Injection moulding. Release agents containing silicone must be avoided. Rotational moulding Recommended melt temperature below 200°C to avoid the decomposition of the polymer. Processing conditions should be optimised for each production line.&&

About

EVA copolymer ALCUDIA® PA-540 is suitable for injection moulding and recommended for those applications where flexibility and toughness are required. It contains antioxidant additives. TYPICAL APPLICATIONS Injection moulding. Release agents containing silicone must be avoided. Rotational moulding Recommended melt temperature below 200°C to avoid the decomposition of the polymer. Processing conditions should be optimised for each production line.&&

Product Description
Supplier	REPSOL
Generic	EVA
Material Status	Commercial: Active
Features	Good flexibility,Food contact compliance,Inoxidizability
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.937	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	10	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)
F50	300	hr	ASTM D1693
Vinyl acetate content	18.0	wt%

MECHANICAL	Nominal value	Unit	Test method
Shore hardness			ISO 868
Shaw’s A	90		ISO 868
Shaw’s D	36		ISO 868
tensile strength
fracture	16.0	MPa	ISO 527-2
Tensile strain
fracture	700	%	ISO 527-2

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	59.0	℃	ISO 306/A
Melting temperature	89.0	℃

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	200	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.