| About |
|---|
| 3M™ Dyneon™ Modified PTFE Compound TFM™ 4105 is a free-flowing compound based on modified suspension PTFE of the 2nd generation containing 25% glass fibre for ram extrusion, compression and automatic moulding. Special Features Increased thermal dimensional stability Increased surface hardness Improved deformation under load Reduced friction & wear Good chemical stability High limiting oxygen index (LOI) Low friction behaviour Very good mechanical properties Exceptional temperature resistance&& |
| Product Description | |
|---|---|
| Generic | PTFE |
| Material Status | Commercial: Active |
| Features | Low coefficient of friction,Welding |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.24 | g/cm³ | ISO 12086 |
| Apparent density | 0.82 | g/cm³ | ISO 12086 |
| Average particle size | 580 | µm | ISO 12086 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 14.0 | MPa | ISO 12086 |
| Tensile strain | |||
| fracture | 420 | % | ISO 12086 |
| Load deformation | |||
| 23℃，15 MPa | 3.50 | % | ASTM D621 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |