| About |
|---|
| Geon™ Vinyl Flexible B8000 is a Flexible Polyvinyl Chloride product. It can be processed by extrusion, injection molding, or profile extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Plumbing/Piping/Potable Water.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Availabilitys | Latin America,Asia Pacific,Europe,Africa & Middle East ,North America |
| Process Methods | Profile extrusion,Injection Molding,Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.30 | g/cm³ | ASTM D792 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -31.7 | ℃ | ASTM D746 |
| Linear coefficient of thermal expansion |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50mm | HB | UL-94 | |
| 3.00mm | HB | UL-94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 74 | ASTM D2240 | |
| tensile strength | |||
| 23℃ | 15.90 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 350 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion molding | Nominal value | Unit | Test method |
| injection molding | Nominal value | Unit | Test method |
| Melt Temperature | 166-171 | ℃ | |
| Melt Temperature | 182-188 | ℃ | |
| Notes |
|---|
| 1. GRAY 2600, BLACK 2999. Max. Temp. of use = 100 degrees F. |
| 2. Typical properties: these are not to be construed as specifications. |
| 3. 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |