Prime Tuff-X ST

About
Prime Tuff-X ST offers the same great benefits as our standard Tuff-X product but with a soft touch feel and look. It has a high friction coefficient and a 5% gloss reading after forming. It has good scratch and mar, UV stable and colorable. Unlike other soft touch products,40% regrind use maintains critical properties. Applications: Prime Tuff-X ST is well suited for applications such as; Instrument panels and decorative trim for RV, ATV, Marine and Heavy Trucks. Processing: Prime Tuff-X ST has better hot strength than our standard Tuff-X, therefore, high sag and webbing during the forming process is not as great. It is still best to form this product on an aluminum tool that is grit blasted. It can be formed on male or female tooling. The forming temperature should be 320-360°F, tool temp. of 170-190°F. Finishing: The same methods for cutting, bonding and fabrication can be used on Prime Tuff-X ST as is used for our other Tuff-X products. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Tuff-X ST, allows for thesubstrate as well as the cap to be colored matched to anything specified. There are certain carriers that we use to assure that the properties of the two products are not distorted. Tuff-X ST is offered in several different textures that include, H/C, FL/HC, Calf Grain, Diamond Plate and Levant ll. We offer a gauge range of .090 to .400 and widths up to 120″.&&

About

Prime Tuff-X ST offers the same great benefits as our standard Tuff-X product but with a soft touch feel and look. It has a high friction coefficient and a 5% gloss reading after forming. It has good scratch and mar, UV stable and colorable. Unlike other soft touch products,40% regrind use maintains critical properties. Applications: Prime Tuff-X ST is well suited for applications such as; Instrument panels and decorative trim for RV, ATV, Marine and Heavy Trucks. Processing: Prime Tuff-X ST has better hot strength than our standard Tuff-X, therefore, high sag and webbing during the forming process is not as great. It is still best to form this product on an aluminum tool that is grit blasted. It can be formed on male or female tooling. The forming temperature should be 320-360°F, tool temp. of 170-190°F. Finishing: The same methods for cutting, bonding and fabrication can be used on Prime Tuff-X ST as is used for our other Tuff-X products. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Tuff-X ST, allows for thesubstrate as well as the cap to be colored matched to anything specified. There are certain carriers that we use to assure that the properties of the two products are not distorted. Tuff-X ST is offered in several different textures that include, H/C, FL/HC, Calf Grain, Diamond Plate and Levant ll. We offer a gauge range of .090 to .400 and widths up to 120″.&&

Product Description
Generic	3D打印材料
Material Status	Commercial: Active
Features	High Friction,Weather resistance is good,Good surface appearance,High impact resistance,High Heat Resistance,Good Tensile Strength,Soft,low-temperature impact resistance,High scratch resistance,Good coloring
Availabilitys	North America,Europe
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.10	g/cm³	ASTM D792
Melt Flow Rate	0.74	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength			ASTM D638
yield	16.5	MPa	ASTM D638
fracture	14.5	MPa	ASTM D638
Tensile strain
fracture	410	%	ASTM D638
Bending modulus	1280	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	无断裂		ASTM D256

THERMAL	Nominal value	Unit	Test method
Linear coefficient of thermal expansion
MD	3.3E-5	1/℃	ASTM D696

Supplementary information	Nominal value	Unit
Maximum Allowable Regrind	40	%
Tool Temperature	77 to 88	℃
Forming temperature	160 to 182	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.