| About |
|---|
| apilon 52c® C PC ESC 27 is a Thermoplastic Polyurethane Elastomer (PC Based) (TPU-PC) product. It is available in Europe. Applications of apilon 52c® C PC ESC 27 include consumer goods and sporting goods. Primary characteristic: good stiffness.&& |
| Product Description | |
|---|---|
| Generic | PC+TPU |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Hydrolysis stability |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| viscosity | |||
| 25℃ | 4000 to 20000 | ||
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 100 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Kofler Softening Range | 190 to 210 | ℃ |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| TPU in DMF | 20 | % |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 82 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| — | 45.0 | MPa | ASTM D638 |
| 100% strain | 5.00 | MPa | ASTM D638 |
| 300% strain | 10.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. With Notch |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |