PTS POM-25 - SOLIAO

About
PTS POM-25 is an Acetal (POM) Copolymer product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.&&

Product Description
Generic	Copolymer Polyformaldehyde
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.41	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	2.5	g/10min	ISO 1133
Shrinkage rate
MD	1.8 to 2.2	%	Internal Method

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	8.0	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	90.0	℃	ISO 75-2/A
Melting temperature
DSC	165	℃	ISO 3146
Linear coefficient of thermal expansion
MD	1.2E-4	1/℃	ISO 11359-2

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
M-level	78		ISO 2039-2
Tensile modulus	2350	MPa	ISO 527-2
tensile strength
fracture	59.0	MPa	ISO 527-2
Tensile strain
fracture	45	%	ISO 527-2
Bending modulus	2200	MPa	ISO 178
bending strength	83.0	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.