SCF600W - SOLIAO

About

Product Description
Generic	PPS
Material Status	Commercial: Active

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.42	g/cm³	GB/1033

MECHANICAL	Nominal value	Unit	Test method
tensile strength	180	MPa	GB/1040
Tensile strain	2.54	%	GB/1040
bending strength	195	MPa	GB/9341
Bending modulus	950	MPa	GB/9341
friction coefficient	0.2		GB/T10006
abrasion	2.8	mg/hr	ISO 9352

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	16	kJ/m²	ISO179-1
Charpy Unnotch Impact strength
23℃	45	kJ/m²	ISO179-1

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.82 MPa	260	℃	GB1634

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

Electrical performance	Nominal value	Unit	Test method
Compared to the scratch index of leakage points	150		GB/4207

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.