NORDEL™ 6565 XFC Hydrocarbon Rubber

About
NORDEL 6565 XFC is an amorphous EPDM grade designed for extruded applications. It is ideally suited for solid and foamed extruded profiles requiring fast cure conditions. The combination of high viscosity and low crystallinity allows for good balance of processability, extensibility, low-temperature properties and performance. The product features improved mixing and extrusion characteristics, suitable for class A surface manufacturing with improved shape stability of the green compound. Main Characteristics: Amorphous High diene High molecular weight Good low temperature properties Applications: Extruded profiles Coolant hoses Complies with: U.S. FDA 21 CFR 175.105 (See NOTES), Consult the regulations for complete details. NOTES: (1) Adhesives only.&&

About

NORDEL 6565 XFC is an amorphous EPDM grade designed for extruded applications. It is ideally suited for solid and foamed extruded profiles requiring fast cure conditions. The combination of high viscosity and low crystallinity allows for good balance of processability, extensibility, low-temperature properties and performance. The product features improved mixing and extrusion characteristics, suitable for class A surface manufacturing with improved shape stability of the green compound. Main Characteristics: Amorphous High diene High molecular weight Good low temperature properties Applications: Extruded profiles Coolant hoses Complies with: U.S. FDA 21 CFR 175.105 (See NOTES), Consult the regulations for complete details. NOTES: (1) Adhesives only.&&

Product Description
Supplier	DOW
Generic	EPDM+SEBS
Material Status	Commercial: Negative
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.862	g/cm³	ASTM D297
Mooney viscosity
ML 1+4，125℃	65	MU	ASTM D1646
Ethylene composition	55.0	wt%	ASTM D3900
Ethylidene norbornene content	8.5	wt%	ASTM D6047
Propylene content	36.5	wt%	ASTM D3900
Residual conversion metal	< 10	ppm	Internal Method
molecular weight distribution	Broad		Internal Method
Ash Content	< 0.1	%	ASTM D296
Volatiles	< 0.40	wt%	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.