| About |
|---|
| TOTAL Polypropylene 3462 is formulated to give excellent process stability in extrusion applications. TOTAL Polypropylene 3462 complies with all applicable FDA regulations for food contact applications. TOTAL Polypropylene 3462 is recommended for slit film, monofilament, and fibrillated tape applications requiring improved process stability.&& |
| Product Description | |
|---|---|
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Food contact compliance,Homopolymer |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.990 | g/cm³ | ISO 1183 |
| Shrinkage rate | ISO 2577 | ||
| TD：23℃ | 1.3 | % | ISO 2577 |
| MD：23℃ | 1.4 | % | ISO 2577 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 8.00 | MPa | ISO 37 |
| 100% strain | 2.40 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 720 | % | ISO 37 |
| tear strength | 26 | kN/m | ISO 34-1 |
| Compression deformation | |||
| 70℃，22 hr | 43 | % | ISO 815 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 58 | ISO 868 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| The rate of change in tensile strength in air (80 ℃, 1000 hr) | 4.0 | % | SAE J2236 |
| Change in Tensile Strain at Break in Air（80℃，1000 hr） | 36 | % | SAE J2236 |
| The rate of change of Shore hardness in air | |||
| 80℃，1000 hr | 3.0 | SAE J2236 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | < 4.00 | cm | ISO 3915 |
| Fogging | |||
| 21℃ | 87 | % | |
| 100℃ | 87 | % |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Color stability | |||
| WL8 dark Taupe（8968） | 0.530 | ||
| XDV Dark Slate（8870） | 0.880 | ||
| ZJ8 dark khaki（8881） | 0.660 | ||
| Axis bending | |||
| -30℃ | Pass |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |