TITANZEX® HF7700

About
HF7700 is a high density polyethylene resin for tubular film extrusion. HF7700 meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 21 CFR 177.1520 (c) 3.1a & 3.2a. APPLICATIONS: Very thin reinforcing film, Grocery bags, Merchandize bags, Disposal waste bags, Shopping bags. ADVANTAGES: Excellent processability, excellent draw down capability and high film strength and rigidity.&&

About

HF7700 is a high density polyethylene resin for tubular film extrusion. HF7700 meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 21 CFR 177.1520 (c) 3.1a & 3.2a. APPLICATIONS: Very thin reinforcing film, Grocery bags, Merchandize bags, Disposal waste bags, Shopping bags. ADVANTAGES: Excellent processability, excellent draw down capability and high film strength and rigidity.&&

Product Description
Supplier	LOTTE
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good dissection,High density
Availabilitys	Asia Pacific
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.952	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.070	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	17	µm
Secant modulus			ASTM D882
1% secant, MD: 17 µ m, blow molded film	1180	MPa	ASTM D882
1% secant, TD: 17 µ m, blow molded film	1080	MPa	ASTM D882
tensile strength			ASTM D882
MD, fracture, 17 µ m, blow molded film	78.5	MPa	ASTM D882
TD, fracture, 17 µ m, blow molded film	53.9	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture, 17 µ m, blow molded film	250	%	ASTM D882
TD, fracture, 17 µ m, blow molded film	660	%	ASTM D882
Drop hammer impact
17 µ m, blow molded film	150	g	ASTM D1709
Elmandorf tear strength			ASTM D1922
MD: 17 µ m, blow molded film	5.1	g	ASTM D1922
TD: 17 µ m, blow molded film	100	g	ASTM D1922

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	180 to 240	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.