KMI PP KM-199IB

About
KM-199IB is a high flow impact copolymer for injection molding application with excellent processability, stiffness-impact strength balance. It can be used for injection molding for large-size application due to its high flowability and as a base resin for PP composite material that is applicable to automobile exterior and interior Characteristics: Excellent processibility Suppression of flow mark (tiger stripe)&&

About

KM-199IB is a high flow impact copolymer for injection molding application with excellent processability, stiffness-impact strength balance. It can be used for injection molding for large-size application due to its high flowability and as a base resin for PP composite material that is applicable to automobile exterior and interior Characteristics: Excellent processibility Suppression of flow mark (tiger stripe)&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High liquidity,Impact copolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	80	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
23℃	49	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature	125	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	95		ASTM D785
tensile strength
yield	30.9	MPa	ASTM D638
Tensile strain
fracture	< 50	%	ASTM D638
Bending modulus	1620	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.