Caltex PP MT14

About
Caltex PP MT14 is a Polypropylene material filled with mineral. It is available in Asia Pacific. Important attributes of Caltex PP MT14 are: Heat Resistant High Stiffness Typical application of Caltex PP MT14: Sheet&&

Product Description
Supplier	GS Caltex
Generic	PP not specified
Material Status	Commercial: Active
Features	Good Rigidity,High Heat Resistance
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.24	g/cm³	ASTM D792
Melt Flow Rate	1.7	g/10min	ASTM D1238
Shrinkage rate			ASTM D955
MD	1.0	%	ASTM D955
TD	0.90	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	69	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	132	℃	ASTM D648
Vicat Softening Temp	150	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	85		ASTM D785
tensile strength
yield	24.5	MPa	ASTM D638
Tensile strain
fracture	30	%	ASTM D638
Bending modulus	2940	MPa	ASTM D790A

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	230 to 250	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.