TECHLEN M3261 - SOLIAO

About
TECHLEN M3261 is a Polypropylene material. It is available in Asia Pacific. Primary attribute of TECHLEN M3261: Eco-Friendly/Green.&&

Product Description
Generic	PP not specified
Material Status	Commercial: Active
Features	Biodegradable,High density
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.18	g/cm³	ASTM D792
Melt Flow Rate	16	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
23℃	49	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	130	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	93		ASTM D785
tensile strength	26.5	MPa	ASTM D638
Tensile strain
fracture	50	%	ASTM D638
Bending modulus	2450	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.