| About |
|---|
| MonoSol AF L711 is a PVOH based thermoplastic film, soluble in cold water and manufactured using MonoSol AF’s proprietary blown film technology. MonoSol AF L711 is a grade of PVOH cold water-soluble film engineered for flow wrapping and pleat wrapping of tablets. This film has excellent stiffness for ease of processing on flow wrapping and pleat wrapping equipment. Available thickness range is 20 micron (0.8 mil) to 60 micron (2.4 mil).&& |
| Product Description | |
|---|---|
| Generic | PVOH |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Biodegradable,Water soluble |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| water content | |||
| 23℃ | 7.1 | % | |
| solubility | |||
| Disintegration：10℃，35.0 µm | 12.0 | sec | |
| Disintegration：24℃，35.0 µm | 5.0 | sec | |
| Dissolution：10℃，35.0 µm | 120.0 | sec | |
| Dissolution：24℃，35.0 µm | 72.0 | sec | |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 35 | µm | |
| film thickness | 20 µm to 60 µm | ||
| Secant modulus | ASTM D882 , ISO 527-3 | ||
| 10%，MD：36 µm | 89.6 | MPa | ASTM D882 , ISO 527-3 |
| 100%，MD：36 µm | 33.8 | MPa | ASTM D882 , ISO 527-3 |
| 10%，TD：36 µm | 82.7 | MPa | ASTM D882 , ISO 527-3 |
| 100%，TD：36 µm | 22.8 | MPa | ASTM D882 , ISO 527-3 |
| tensile strength | |||
| MD, fracture, 36 µ m | 45.5 | MPa | ASTM D882 |
| TD, fracture, 36 µ m | 43.4 | MPa | ASTM D882 |
| MD，36 µm | 45.5 | MPa | ISO 527-3 |
| TD，36 µm | 43.4 | MPa | ISO 527-3 |
| Tensile strain | ASTM D882 , ISO 527-3 | ||
| MD, fracture, 36 µ m | 180 | % | ASTM D882 , ISO 527-3 |
| TD, fracture, 36 µ m | 230 | % | ASTM D882 , ISO 527-3 |
| Drop hammer impact | |||
| 36 µm | 560 | g | ASTM D1709，DIN 53433 |
| Elmandorf tear strength | |||
| MD：36 µm | 390 | g | ASTM D1922 |
| TD：36 µm | 390 | g | ASTM D1922 |
| MD：36 µm | 0.040 | N | ISO 6383-2 |
| TD：36 µm | 0.040 | N | ISO 6383-2 |
| dosage | |||
| 35.0 µm | 22.9 | m²/kg | ASTM D4321 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 50%RH |
| 3. Distilled Water (MSTM 205) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |