RC Plastics RCPCA10

About
RC Plastics RCPCA10 is a Polycarbonate + ABS (PC+ABS) product. It can be processed by injection molding and is available in North America. Characteristics include: Flame Rated Eco-Friendly/Green&&

Product Description
Generic	PC+ABS
Material Status	Commercial: Active
Features	V-0
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³	ASTM D792
Melt Flow Rate
260℃，2.16kg	10	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength	59.3	MPa	ASTM D638
Tensile strain
fracture	20	%	ASTM D638
Bending modulus	2620	MPa	ASTM D790
bending strength	92.4	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam	530	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	90.6	℃	ASTM D648

FLAME CHARACTERISTICS	Nominal value	Test method
Flame retardant level		UL 94
1.60 mm	V-0	UL 94
3.20 mm	V-0	UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	82	°C
Drying time	3.0 to 4.0	hr
Barrel rear temperature	232 to 282	°C
Barrel middle temperature	232 to 282	°C
Barrel front temperature	232 to 282	°C
Processing (melt) temperature	221 to 288	°C
Mold temperature	49 to 79	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.