Stylac™ CS747

About
Stylac™ CS747 is an Acrylonitrile Styrene Copolymer (AS) product. It is available in Africa & Middle East, Asia Pacific, or Europe. Typical application: Optics/Lenses. Characteristics include: Flame Rated Clarity Good Aesthetics&&

Product Description
SupplierAsahi Kasei
GenericSAN
Material StatusCommercial: Active
FeaturesGood Clarity,Optical performance,HB
AvailabilitysAfrica & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density1.07g/cm³ISO 1183
Melt Flow Rate
220℃,10.0kg12g/10minISO 1133
Melt Volume Rate
220℃,10 kg12.5cm³/10minISO 1133
Shrinkage rate
MD0.15 to 0.35%ASTM D955

MECHANICALNominal valueUnitTest method
tensile strength
yield68.4MPaISO 527-2/5
Bending modulus3700MPaISO 178
bending strength124MPaISO 178

IMPACTNominal valueUnitTest method
Charpy Notched Impact Strength
23℃1.3kJ/m²ISO 179

THERMALNominal valueUnitTest method
Hot deformation temperature
1.8 MPa, unannealed86.3ISO 75-2/A
Vicat Softening Temp102ISO 306/B
Linear coefficient of thermal expansion
MD7.2E-51/℃ASTM D696
Relative temperature index50.0UL 746
Electrical performance50.0UL 746
Impact mechanical performance50.0UL 746
Ball pressure test100EMAC

FLAME CHARACTERISTICSNominal valueUnitTest method
Flame retardant level
1.50 mmHB UL 94

Notes
1. Typical properties: these are not to be construed as specifications.
2. 0.079 in/min
3. Registered Number: B-1574
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.