Moplen S81S - SOLIAO

About
Moplen S81S is a polypropylene homo-polymer particularly suitable for the production of textile film yarn and monofilament (not food grade). Moplen S81S combines excellent process ability with high mechanical properties and very high light resistance. Moplen S81S is particularly suitable to produce film yarn, both with cast and tubular processes. Textile film yarns have a denier count of not more than 1000 to 1200 and care used for the production of the bags, industrial fabrics & mats. Film yarn with a denier count ranging 3000 to 28000 is used for baler twins, twins for agricultural use, ropes. * Moplen S81S S is also well suited for the production of monofilament used for instance for brush & broom filling & technical applications. Strapping, extruded nets, blow moulded small containers & technical components are other typical applications.&&

About

Moplen S81S is a polypropylene homo-polymer particularly suitable for the production of textile film yarn and monofilament (not food grade). Moplen S81S combines excellent process ability with high mechanical properties and very high light resistance. Moplen S81S is particularly suitable to produce film yarn, both with cast and tubular processes. Textile film yarns have a denier count of not more than 1000 to 1200 and care used for the production of the bags, industrial fabrics & mats. Film yarn with a denier count ranging 3000 to 28000 is used for baler twins, twins for agricultural use, ropes. * Moplen S81S S is also well suited for the production of monofilament used for instance for brush & broom filling & technical applications. Strapping, extruded nets, blow moulded small containers & technical components are other typical applications.&&

Product Description
Supplier	LyondellBasell
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Weather resistance is good,Excellent Processability,Homopolymer
Availabilitys	Africa & Middle East

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	1.8	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	36.0	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	1450	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	60	J/m	ASTM D256

Aging performance	Nominal value	Unit	Test method
Oven Aging
150℃	15.0	day	ASTM D3012

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	94.0	℃	ASTM D648
Vicat Softening Temp	152	℃	ASTM D1525 2

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.