Jampilen HP522H

About
Jampilen HP522H is a homopolymer for the production of biaxially oriented polypropylene films which is particularly suitable for metallization, both as plain film and in coextruded structures. Jampilen HP522H has been designed to provide a very stable extrusion on stenter lines and to give excellent thickness control, increased drawability and readiness to a two way orientation. This grade contains a reinforced processing stabilization but does not contain any slip or antiblocking agents and is calcium stearate free. The product features low water carry-over properties and is therefore also suitable for tubular BOPP. BOPP films produced with Jampilen HP522H feature good mechanical properties, even at low temperatures, excellent barrier against moisture, odours, oils, fats and oxygen and good optical properties. Monolayer or coextruded films made of Jampilen HP522H with a thickness ranging from 20 to 40 µm are used for the packaging of foodstuffs, cosmetics and videocassettes.Jampilen HP522H is suitable for food contact.&&

About

Jampilen HP522H is a homopolymer for the production of biaxially oriented polypropylene films which is particularly suitable for metallization, both as plain film and in coextruded structures. Jampilen HP522H has been designed to provide a very stable extrusion on stenter lines and to give excellent thickness control, increased drawability and readiness to a two way orientation. This grade contains a reinforced processing stabilization but does not contain any slip or antiblocking agents and is calcium stearate free. The product features low water carry-over properties and is therefore also suitable for tubular BOPP. BOPP films produced with Jampilen HP522H feature good mechanical properties, even at low temperatures, excellent barrier against moisture, odours, oils, fats and oxygen and good optical properties. Monolayer or coextruded films made of Jampilen HP522H with a thickness ranging from 20 to 40 µm are used for the packaging of foodstuffs, cosmetics and videocassettes.Jampilen HP522H is suitable for food contact.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	High impact resistance,Good dissection,Optical performance,Retention of aroma ,Low odor,Food contact compliance,Moisture resistance,Grease resistance,Block resin,Puncture Resistant,Low water portability,Homopolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	2.0	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	60	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	94.0	℃	ASTM D648
Vicat Softening Temp	154	℃	ASTM D1525 1
Accelerate oven aging
150℃	500	hr	ASTM D3012

optical performance	Nominal value	Unit	Test method
Haze
20 µm	0.60	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	105		ASTM D785
tensile strength
yield	35.0	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	1650	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.