CERTENE™ PHM-35AN

About
CERTENE™ PHM-35AN PHM-35AN is a certified prime grade Nucleated Polypropylene designed for injection molding of lightweight and thin-walled articles. PHM-35AN contains antistatic and offers good balance of high flow processability with high contact clarity, good tensile strength, short cycling, excellent dimensional stability, and good surface finishing. PHM-35AN applications include intricate long-flow path designs, multi-cavity parts, caps, closures, housewares, containers and toys. PHM-35AN processing temperature is between 220° to 240°C with mold at 20°-50°C. PHM-35AN complies with FDA regulation 21CFR 177.1520 and most international regulations concerning Polypropylene use in contact with food.&&

About

CERTENE™ PHM-35AN PHM-35AN is a certified prime grade Nucleated Polypropylene designed for injection molding of lightweight and thin-walled articles. PHM-35AN contains antistatic and offers good balance of high flow processability with high contact clarity, good tensile strength, short cycling, excellent dimensional stability, and good surface finishing. PHM-35AN applications include intricate long-flow path designs, multi-cavity parts, caps, closures, housewares, containers and toys. PHM-35AN processing temperature is between 220° to 240°C with mold at 20°-50°C. PHM-35AN complies with FDA regulation 21CFR 177.1520 and most international regulations concerning Polypropylene use in contact with food.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Good surface appearance,Good Dimensional Stability,High liquidity,Nucleation,Quick molding cycle,Food contact compliance,Good Tensile Strength,Antistatic property,Homopolymer
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.903	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	35	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23 ℃, injection molding	32	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed, injection molded	93.0	℃	ASTM D648
Vicat Softening Temp	152	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, injection molding	32.0	MPa	ASTM D638
Tensile strain
Yield, injection molding	12	%	ASTM D638
Bending modulus
1% cut, injection molding	1170	MPa	ASTM D790
Rockwell hardness
R-level	83		ASTM D785

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	220 to 240	°C
Mold temperature	20 to 50	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.