| About |
|---|
| Blue Fluorosilicone Rubber, 60 to 70 °IRHD. Fluorosilicone rubber having methyl, vinyl and fluorine substituent groups on the polymer chain. Meets material properties of Aerospace Specification Mil-R-25988B, Class 1, Grade 70. Excellent heat resistance and low temperature flexibility. Suitable for sealing petroleum oils and hydrocarbon fuels. Fluorosilicones are widely used in aircraft fuel systems.&& |
| Product Description | |
|---|---|
| Generic | 氟硅氧烷 |
| Material Status | Commercial: Active |
| Features | High Heat Resistance,Low temperature toughness |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| IRHD hardness | 65 | ASTM D1415 , ISO 48 | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 8.00 | MPa | ASTM D412 , ISO 37 |
| Tensile strain | |||
| fracture | 200 | % | ASTM D412,ISO 37 |
| Compression deformation | |||
| 175℃,22 hr | 10 | % | ASTM D395,ISO 815 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| The rate of change in tensile strength in air | |||
| 200℃,70 hr | 5.0 | % | ASTM D573 , ISO 188 |
| The rate of change in ultimate elongation in air | |||
| 200℃,70 hr | -14 | % | ASTM D573 , ISO 188 |
| The change rate of IRHD hardness in the air | |||
| 200℃,70 hr | 5.0 | ASTM D573 , ISO 188 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Maximum operating temperature | 225 | ℃ |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Low temperature resistance | |||
| TR10 | -57 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |
