| About |
|---|
| PETILEN F2-12 is a Low Density Polyethylene product. It can be processed by film extrusion and is available in Asia Pacific, Europe, or North America. Applications of PETILEN F2-12 include film and packaging.&& |
| Product Description | |
|---|---|
| Generic | LDPE |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 to 0.922 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.1 to 3.0 | g/10min | ASTM D1238 |
| Ash Content | 0.1 | % | |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | 70 | ASTM D2457 | |
| Haze | 6.3 | % | ASTM D1003 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Film Quality | A |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. ALKT-509 |
| 3. ALKATHENE 36 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |