PREMIER™ A230-HTHF

About
PREMIER™ is the world’s first and most versatile commercially available conductive thermoplastic for real world EMI shielding solutions. It is a blend of PC/ABS thermoplastic polymer alloys and conductive fillers engineered for stable electrical, mechanical, and physical performance. The conductive filler technology utilizes nickel plated carbon (Ni-C) fibers as the base filler. In the case of higher shielding versions, Nickel-Graphite (Ni-C) powder is blended with the fiber base to deliver enhanced performance.&&

About

PREMIER™ is the world’s first and most versatile commercially available conductive thermoplastic for real world EMI shielding solutions. It is a blend of PC/ABS thermoplastic polymer alloys and conductive fillers engineered for stable electrical, mechanical, and physical performance. The conductive filler technology utilizes nickel plated carbon (Ni-C) fibers as the base filler. In the case of higher shielding versions, Nickel-Graphite (Ni-C) powder is blended with the fiber base to deliver enhanced performance.&&

Product Description
Supplier	Parker Hannifin
Generic	PC+ABS
Material Status	Commercial: Active
Features	Conductive,Renewable resources,Halogen free,Corrosion Resistant,Non-corrosiveness,Good Tensile Strength,Low density,EMI
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.39	g/cm³	ASTM D3763

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	6700	MPa	ASTM D638
tensile strength
fracture	71.0	MPa	ASTM D638
Tensile strain
fracture	1.2	%	ASTM D638
Bending modulus	6300	MPa	ASTM D790
bending strength	100	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	53	J/m	ASTM D412
Notched impact strength of cantilever beam	180	J/m	ASTM D412

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	120	℃	ASTM D648
Linear coefficient of thermal expansion
MD	3.0E-5	1/℃	ASTM D696
Thermal conductivity coefficient	0.59	W/m/K	ASTM D5470
Relative temperature index	85.0	℃	UL 746
Electrical performance	85.0	℃	UL 746
Impact mechanical performance	85.0	℃	UL 746

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	0.60	ohms
Volume resistivity	0.060	ohms·cm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.