PRL PPX-FR2-(color)-EN

About
PRL PPX-FR2-(color)-EN is a Polyphenylene Ether + PS (PPE+PS) product. It can be processed by extrusion and is available in North America. Characteristics include: Flame Rated RoHS Compliant Flame Retardant Halogen Free Heat Resistant&&

Product Description
Generic	PPO(PPE)+PS
Material Status	Commercial: Active
Features	Halogen free,Flame Characteristics,Self-extinguishing,Heat Resistance, Good,V-1
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.09	g/cm³	ASTM D792
Melt Flow Rate
250℃，11.6kg	20 to 40	g/10min	ASTM D1238
Shrinkage rate
MD：3.2 mm	0.50 to 0.70	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-40℃，3.2mm	130	J/m	ASTM D256
23℃，3.2mm	270	J/m	ASTM D256
Drop hammer impact
3.2 mm	16.9	J	ASTM D3029

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed, 3.2 mm	93.3	℃	ASTM D648
0.45 MPa, unannealed, 3.2 mm	98.9	℃	ASTM D648
Relative temperature index
Electrical performance			UL 746
Strength mechanical performance			UL 746
Impact mechanical performance			UL 746
3.0 mm	65.0	℃	UL 746
6.0 mm	65.0	℃	UL 746

FLAME CHARACTERISTICS	Nominal value	Test method
Flame retardant level		UL 94
3.00 mm	V-1	UL 94
6.00 mm	V-1	UL 94

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Fracture, 3.18 mm	49.0	MPa	ASTM D638
Yield, 3.17 mm	50.3	MPa	ASTM D638
Tensile strain
Fracture, 3.18 mm	35	%	ASTM D638
Bending modulus
3.17 mm	2410	MPa	ASTM D790
bending strength
3.18 mm	82.7	MPa	ASTM D790
Rockwell hardness
R-level	115		ASTM D785

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	99 to 104	°C
Drying time	3.0 to 4.0	hr
Barrel 1 zone temperature	177	°C
Barrel 2 zone temperature	193	°C
Barrel 3 zone temperature	193	°C
Melt temperature	199 to 227	°C
Nozzle temperature	216	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.