| About |
|---|
| Biocompatible, high flow, medium impact acrylic resin for healthcare applications. Stabilized to provide improved color after gamma sterilization. Transmittance 92%. Haze 1.5%.&& |
| Product Description | |
|---|---|
| Supplier | LTL Color |
| Generic | SMMA |
| Material Status | Commercial: Active |
| Features | High liquidity,Biocompatible,Radiation disinfection |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.17 | g/cm³ | ASTM D792 |
| Density | 1.17 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，3.80kg | 13 | g/10min | ASTM D1238 |
| 230℃，3.80kg | 13 | g/10min | ISO 1133 |
| Shrinkage rate | |||
| MD | 0.30 to 0.60 | % | ASTM D955 |
| Water absorption rate | |||
| 23℃，24hr | 0.30 | % | ISO 62 |
| 23℃，24hr | 0.30 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2410 | MPa | ASTM D638 |
| Tensile modulus | 2410 | MPa | ISO 527-2 |
| tensile strength | 46.2 | MPa | ISO 527-2 |
| limit | 46.2 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 33 | % | ASTM D638 |
| fracture | 33 | % | ISO 527-2 |
| Bending modulus | 2410 | MPa | ASTM D790 |
| Bending modulus | 2410 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 3.0 | kJ/m² | ISO 179/2C |
| Charpy Unnotch Impact strength | 34 | kJ/m² | ISO 179/2U |
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 32 | J/m | ASTM D256 |
| 23℃ | 3.1 | kJ/m² | ISO 180-1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 81.1 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 81.1 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | 82.8 | ℃ | ASTM D1525 3 |
| B50 | 82.8 | ℃ | ISO 306 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | |||
| 3180 µm | 92.0 | % | ASTM D1003 |
| Haze | |||
| 3180 µm | 1.5 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |