| About |
|---|
| DAI-EL® G-801 DAI-EL® G-801 is a peroxide curable copolymer with medium Mooney viscosity suitable for transfer and compression molding. DAI-EL® G-801can be formulated with various peroxide cure systems to eliminate the need for post cure. DAI-EL® G-801 provides superior mechanical properties and resistance to steam and aqueous solvents compared with bisphenol cured fluoroelastomers.&&DAI-EL® G-801 DAI-EL G-801 is a fluoroelastomer comprising copolymer of vinylidenefluoride/hexafluoropropylene, which can be cured by peroxide. In comparison to the grade of polyol curing material, this material provides excellent mechanical properties, and bending, acid and steam resistance.&& |
| Product Description | |
|---|---|
| Supplier | Daikin Fluorochemicals |
| Generic | 氟橡胶 |
| Material Status | Commercial: Active |
| Features | Acidproof,Copolymer,Resistance to the steam |
| Availabilitys | North America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.81 | g/cm³ | |
| Mooney viscosity | |||
| ML 1+10，121℃ | 37 | MU | |
| Fluorine content | 66 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 25 ℃ | 66 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 25 ℃ | 22.0 | MPa | |
| 100% strain, 25 ℃ | 2.00 | MPa | |
| Tensile strain | |||
| Fracture, 25 ℃ | 450 | % | |
| tear strength | |||
| 25℃ | 20.6 | kN/m | |
| Compression deformation | |||
| 25℃，70 hr | 21 | % | |
| 100℃，70 hr | 17 | % | |
| 175℃，70 hr | 25 | % | |
| 200℃，70 hr | 38 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -25.0 | ℃ |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Gehman Torsion Test | |||
| T10 | -16 | ℃ | |
| T2 | -10 | ℃ | |
| TR Test | |||
| TR10 | -19 | ℃ | |
| TR70 | -10 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 23°C |
| 3. 25% compression |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |