Perfactory® RC31

About
EnvisionTEC‘s RC31 is a high temperature resistant resin for building tough and stiff parts. It can be processed on all Perfactory® products from EnvisionTEC. RC31 is a nanoparticle-filled material that is used to build hard-wearing, stiff and high temperature-resistant parts. They have an opaque peach color appearance. RC31 is ideal for applications requiring superior stiffness and high heat deflection temperature, such as automotive components, pump housings and impellers, wind tunnel test parts, light reflectors, injection molds, hard chrome plating, etc. Applications Aerospace, Animation and Entertainment, Architecture and Art, Automotive, Consumer Packaged Goods, Education, Electronics, Manufacturing, Sporting Goods, Toys Recommended Machines: Perfactory® 4 Standard with ERM, Perfactory® 4 Standard XL with ERM&&

About

EnvisionTEC‘s RC31 is a high temperature resistant resin for building tough and stiff parts. It can be processed on all Perfactory® products from EnvisionTEC. RC31 is a nanoparticle-filled material that is used to build hard-wearing, stiff and high temperature-resistant parts. They have an opaque peach color appearance. RC31 is ideal for applications requiring superior stiffness and high heat deflection temperature, such as automotive components, pump housings and impellers, wind tunnel test parts, light reflectors, injection molds, hard chrome plating, etc. Applications Aerospace, Animation and Entertainment, Architecture and Art, Automotive, Consumer Packaged Goods, Education, Electronics, Manufacturing, Sporting Goods, Toys Recommended Machines: Perfactory® 4 Standard with ERM, Perfactory® 4 Standard XL with ERM&&

Product Description
Generic	SMMA
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,High Heat Resistance
Availabilitys	North America,Europe

Technical Data
IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	16	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	67.0	℃	ASTM D648
1.8 MPa, unannealed	53.6	℃	ASTM D648
Glass transition temperature	42.0	℃	ASTM E1545

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	93		ASTM D1004
Tensile modulus	4890	MPa	ASTM D638
tensile strength	35.4	MPa	ASTM D638
Tensile strain
fracture	2.5	%	ASTM D638
Bending modulus	3860	MPa	ASTM D790
bending strength	102	MPa	ASTM D790
Compression modulus	4490	MPa	ASTM D695
compressive strength	< 127	MPa	ASTM D695

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.