| About |
|---|
| TC-5015 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. When used to make molds, the TC-5015 A/B is translucent enough to see-through when casting into the mold cavity. This aids in developing void free surfaces on the casting. TC-5015 A/B is also commonly used to make ink stamp pads as well as other types of pressure pads.&& |
| Product Description | |
|---|---|
| Generic | 硅酮 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability |
| Availabilitys | Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| — | 0.968 | g/cm³ | |
| — | 1.07 | g/cm³ | |
| — | 1.06 | g/cm³ | ASTM D792 |
| Shrinkage rate | Nil | ASTM D2566 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 10 to 20 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 2.21 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 350 | % | ASTM D412 |
| tear strength | 10.5 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 100 | ||
| Component B | 按重量计算的混合比: 10 | ||
| Storage period | 26 | wk |
| Thermosetting mixed viscosity | Nominal value | Unit | Test method |
|---|---|---|---|
| 25℃ | 15000 | cP | |
| 25℃ | 80.0 | cP | |
| 25℃ | 31000 | cP | |
| stripping time | |||
| 25℃ | 1400 | min | |
| Gelation time | 30.0 | min | |
| working hours | 25.0 | min |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Part B |
| 3. Part A |
| 4. 1″ depth |
| 5. Mixed |
| 6. 100g mass |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |