EPDM 763P - SOLIAO

About
EPDM 763P is a medium viscosity, medium ethylene ethylene-propylene-diene terpolymer (EPDM) having a moderate cure rate that is suited to applications where low modulus, good elongation, as well as heat and weather resistance are required. The form is clear pellet. EPDM 763P is made from INSITE™ technology. Main Characteristics: Medium crystalline Low diene High molecular weight Heat and UV stable Applications: Impact modification Wire and cable Peroxide cured heat resistant hose Notes: Can be used in contact with all foods except water in oil emulsions, high or low fat, and low moisture fats and oil. Adhesives only. Complies with: U.S. FDA 21 CFR 177.2600 U.S. FDA 21 CFR 175.1520 U.S. FDA 21 CFR 175.105 U.S. FDA 21 CFR 177.1210 Consult the regulations for complete details.&&

About

EPDM 763P is a medium viscosity, medium ethylene ethylene-propylene-diene terpolymer (EPDM) having a moderate cure rate that is suited to applications where low modulus, good elongation, as well as heat and weather resistance are required. The form is clear pellet. EPDM 763P is made from INSITE™ technology. Main Characteristics: Medium crystalline Low diene High molecular weight Heat and UV stable Applications: Impact modification Wire and cable Peroxide cured heat resistant hose Notes: Can be used in contact with all foods except water in oil emulsions, high or low fat, and low moisture fats and oil. Adhesives only. Complies with: U.S. FDA 21 CFR 177.2600 U.S. FDA 21 CFR 175.1520 U.S. FDA 21 CFR 175.105 U.S. FDA 21 CFR 177.1210 Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	EPDM+SEBS
Material Status	Commercial: Active
Features	Weather resistance is good
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.870	g/cm³	ASTM D297
Mooney viscosity
ML 1+4，125℃	58 to 68	MU	ASTM D1646
Ethylene composition	68.0 to 72.0	wt%	ASTM D3900
Ethylidene norbornene content	1.7 to 2.7	wt%	ASTM D6047
Propylene content	32.0	wt%	ASTM D3900
molecular weight distribution	Medium		Internal Method
Volatiles	< 0.40	wt%	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.