| About |
|---|
| NEOFLON PCTFE has the best performance of gas barrier properties, especially for low permeation capability to moisture and steam atmosphere compared with other plastics. The heat resistance and chemical resistance capabilities are lesser than PFA and FEP, however, mechanical characteristics (especially hardness) are superior. Features Pellet form. Especially suitable for extrusion molding.&& |
| Product Description | |
|---|---|
| Supplier | Daikin Fluorochemicals |
| Generic | PCTFE |
| Material Status | Commercial: Active |
| Features | Low odor |
| Availabilitys | Asia Pacific |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Volume Rate | 0.480 to 0.630 | cm³/10min | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 75 to 85 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |