Jampilen EPD60R

About
Jampilen EPD60R is a high molecular weight heterophasic copolymer for blow molding and extrusion and is designed to produce items with superior toughness, even at low temperatures. Jampilen EPD60R exhibits excellent heat and detergent resistance. Due to its excellent impact strength and its particular formulation, Jampilen EPD60R is well suited for extrusion blow molding of appliance components, wheels, under-the-hood automotive parts, toolboxes, suitcases and large containers. Extrusion applications of Jampilen EPD60R include profiles, pipes and tough sheet for industrial applications. Sheet produced with Jampilen EPD60R is also well suited for thermoforming trays for cold storage. Jampilen EPD60R can be compression molded into thick sheet. Jampilen EPD60R is suitable for food contact but not intended for medical and pharmaceutical application.&&

About

Jampilen EPD60R is a high molecular weight heterophasic copolymer for blow molding and extrusion and is designed to produce items with superior toughness, even at low temperatures. Jampilen EPD60R exhibits excellent heat and detergent resistance. Due to its excellent impact strength and its particular formulation, Jampilen EPD60R is well suited for extrusion blow molding of appliance components, wheels, under-the-hood automotive parts, toolboxes, suitcases and large containers. Extrusion applications of Jampilen EPD60R include profiles, pipes and tough sheet for industrial applications. Sheet produced with Jampilen EPD60R is also well suited for thermoforming trays for cold storage. Jampilen EPD60R can be compression molded into thick sheet. Jampilen EPD60R is suitable for food contact but not intended for medical and pharmaceutical application.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good flexibility,High impact resistance,Food contact compliance,High Heat Resistance,High molecular weight,Copolymer,Low temperature toughness,Resistance to detergents
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	0.40	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃	80	J/m
0℃	350	J/m
23℃	750	J/m

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	85.0	℃	ASTM D648
Vicat Softening Temp	150	℃	ASTM D1525 1
Accelerate oven aging
150℃	1800	hr	ASTM D3012

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	77		ASTM D785
tensile strength
yield	27.0	MPa	ASTM D638
Tensile strain
yield	15	%	ASTM D638
Bending modulus	1100	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.